Mechanical weight sensor
Professional sensor technology provider for commercial vehicles and iot applications.
Mechanical Weight sensor
Connector
1.1 Production Introduction
4U0003 Axle load sensor is designed for axle load and cargo weight monitoring through vechicle tracking system . It usded to determine the displacement of a leaf spring suspension of a vehcile.
The operation of 4U0003 is based on the conversion of the sensor lever rotation angle into an output voltage. A magnetoresistive sensing element is used as a transducer.
The output of the sensor will be a stabilized analog voltage signal .The signal corresponds to the angular postion of the rotary lever. The Product can only output analog signals
1.2 Working Principle
4U0003 Axle load sensor is designed for axle load and cargo weight monitoring through vechicle tracking system . It usded to determine the displacement of a leaf spring suspension of a vehcile.
2.1 Structure Drawing
2.2 Installation Instruction
Note: When installing, you need to use our repair kit. If you encounter problems during the installation process, please contact us to provide the installation video.
2.3.1 Installation Diagram
2.3.2 Repair Kit Usage Diagram
2.3.3 4U0003 Sensor Customer Installation case
Note: This case is from Saudi Arabia
3.1 Specification of 4U0003
|
Parameter,measurement unit.
|
Value
|
|---|---|
|
Power supply, V
|
9-32
|
|
Measured angle range, deg
|
-40..40
|
|
Weight
|
95g
|
|
Relative error of rotation angle detection,%
|
s2
|
|
Ambient operating temperature,C
|
-40...+85
|
|
Output interface
|
voltage of 0-5V
|
3.2 Wire Configuration Diagram
|
Pin number
|
Power circuit
|
Notes
|
|---|---|---|
|
1
|
V+
|
Power supply
|
|
2
|
GND
|
Ground
|
|
3
|
OUT
|
Analog output
|
4-pin plug pin description diagram
3.2.1 Installation case
|
4U0003 Alex load sensor
|
||
|---|---|---|
|
Pin number
|
Power circuit
|
Notes
|
|
1
|
VDD
|
Power supply
|
|
2
|
GND
|
Ground
|
|
3
|
OUT
|
Analog output
|
|
TELTONIKA FMC130
|
||
|---|---|---|
|
Pin number
|
Power circuit
|
Notes
|
|
7
|
GND
|
Ground
|
|
4
|
VDC
|
Power supply
|
|
1
|
DIN2-N/AIN1
|
|
(The two pictures represent the product and plug respectively)
The 4U0003 load sensor can work with all the GPS trackers with analog.The image above shows how 4U0003 connects and works with Teltonika FMC130.
3.3 Data sheet ( angle & output voltage)
|
Rotation angle, degrees
|
Output voitage, V
|
|---|---|
|
-40
|
1.54
|
|
-30
|
1.78
|
|
-20
|
2.02
|
|
-10
|
2.26
|
|
0
|
2.50
|
|
10
|
2.74
|
|
20
|
2.98
|
|
30
|
3,22
|
|
40
|
3.46
|
