Temperature and humidity sensor
Professional sensor technology provider for commercial vehicles and iot applications.
1-WIRE TEMPERATURE AND HUMIDITY SENSOR
Application
1.1 Production Introduction
76U0055 represents an integrated digital solution for environmental sensing applications, combining dual measurement capabilities within a compact 1-Wire compatible device. This cost-effective system-on-chip solution features factory-calibrated outputs for both relative humidity and ambient temperature detection.
1.2 Application
Agriculture & Food Industry
Smart Greenhouse Cultivation
Food Storage & Transportation
Life Science Applications
Pharmaceutical Cold Chain Logistics
Medical Equipment Storage
Industrial Environment Monitoring
Data Centers/Equipment Rooms
Clean Workshop
Museum Archives
2.1 Structure Drawing
|
Description
|
Sensor
|
Clamp
|
Screw
|
Gluy tape
|
|---|---|---|---|---|
|
QTY
|
*1
|
*1
|
*2
|
*1
|
Dimension
2.2 Installation Instruction
2.3 Status indicator
The status of the device is shown by single LED, located on the front panel
If the LED stays bright , sensor works properly;
If the LED blinks on period of 3 seconds, the data wire (white) was not connected;
If LED doesn’t blink, there isn’t power supply.
3.1 Technical Parameters
|
Parameter
|
Data
|
Note
|
Resolution
|
|---|---|---|---|
|
Operating Voltage:
|
5V
|
±0.5
|
|
|
Operating Temperature:
|
-10℃~+60℃
|
±0.4
|
0.1
|
|
Operating Humidity:
|
20%RH~90%RH
|
±3%
|
0.1
|
|
Ingree protection
|
IP00
|
|
|
|
Protocol
|
1-WIRE
|
|
|
|
Guarantee
|
3Years
|
|
|
3.2 Pinout
|
Signals
|
Cable Colors
|
|---|---|
|
VDD(5V±0.5)
|
Red
|
|
Data
|
White
|
|
GND(Ground)
|
Black
|
3.3 Wiring Example
Note: 76U0055 can connected to any Tracker with 1-wire input. FMC130 is just an example.
3.4 Product using case
When we connected our 76U0055 sensor with TELTONIKA FMC 130.
The temperature and humidity data was displayed in the background of Tracker.
|
Input Name
|
Current Value
|
Units
|
Priority
|
|---|---|---|---|
|
Temperature data1
|
193
|
℃
|
None
|
|
Temperature data ID 1
|
0x6600001FA746BE01
|
|
None
|
|
Humidity data
|
486
|
%RH
|
None
|
4 Attention
When using or testing this product, do not place it in water.This will cause a short circuit and make the product inoperable.
If you need to test the product, you can change the temperature by using a refrigerator or other device.
